chunky industrial Shelf brackets elbows
Our extra heavy duty range take the industrial style to a whole new level these shelf brackets are more than just a bracket the look that these bigger pipes give, is a raw glimpse of our industrial heritage.
we feel that this feeling of pride of our heritage is exactly what inspires our appreciation for the industrial style design trend.
strong bold and sometimes harsh.
These Industrial style shelf brackets are produced from a massive one inch black industrial pipe, in non pipe terms that is 33.4mm outside diameter
even though we have gone overkill on the material size this particular design is softened a little with its use of elbows for a more gentle radiused leading edge
shelf size guide
This guide works on a formula of no more than one third of the shelf shall over hang the front of the mounting disc for example :
“A 4 x 4 bracket is measured 105mm from the vertical face of the wall and the furthest edge from the wall on the support disc. the supporting flange is 65mm in diameter meaning that the centre of the flange and upright pipe is at 105mm – 32mm = 73mm , if we then multiply this by two and divide by three we get 50 mm (to nearest 1/2 cm) add this to the original value of 105mm we get 155mm “
|bracket size||4 x 4||6 x 4||6 x 6||8 x 4||8 x 6|
|minimum shelf depth (cm)||11||16||16||21||21|
|recommended depth (cm)||12-15||16-22||16-22||22-28||22-28|